|
The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum - or your money back. Gallery - click for larger images 10 reasons why you should buy a Diago Powerstation: It will power over 95% of pedals, including some quirky stuff like the Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4). It can power from 1 to 30 pedals (with enough daisy chain cables) with ease. It automatically supplies the required amount of current, up to 3,000mA which is: 10 x most plug top / wall wart type power supplies 6 x the Power Bank / Signal Flex 4 x the £160 Voodoo Lab Pedal Power 2
It's quiet - uses studio quality components for hum and noise free operation. It's small - much like the power supply you'd get with a laptop. It's light - so it can be Velcroed down to your pedal board (Velcro supplied). It's tough - the heavy duty ABS case is durable and shock resistant. It's efficient - around 80% compared with around 45% for those mentioned above, so it doesn't get hot. It will work in any country without the need for step-up or step down transformers (accepts 90-264V AC input at 50-60Hz). We can supply a 2m (6ft) mains cable for your country free of charge. Yes, everywhere means everywhere like the UK, USA, all of Europe, Australia etc............ It's safe - the design includes short circuit and voltage protection, and meets all national and international safety regulations so that you or your pedals won't fry!
What pedals will the Powerstation work with? The daisy chains will power most 9V DC pedals that follow the Boss convention of 2.1mm, centre -ve barrel plugs, including most by Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR and Zoom. Use these adaptors for other pedals:  | Deluxe Daisy Chain |  | Green Adaptor
- Use it to power Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4)
- Reverses polarity to a centre +ve, 2.5mm barrel plug
- Buy as many as you need, one for each pedal
- Just plugs on to your existing daisy chain cable
|  | Blue Adaptor
- Use it to power some Electro Harmonix, ProCo (RAT etc.), older DOD, older Jacques, and other pedals
- Reverses polarity to a positive tip, 3.5mm (1/8") mini jack plug
- Buy as many as you need, one for each pedal
- Just plugs on to your existing daisy chain cable
|  | Red Adaptor - Use it to power some older Dunlop pedals, some Fulltone pedals, Yamaha keyboards, samplers, and drum machines, as well as many others (check compatibility)
-
Reverses polarity to a centre +ve, 2.1mm barrel plug Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable
|  | White Adaptor - Use it to power pedals that takes a 9V battery
- Ideal for some older Ibanez, MXR and new boutique pedals without DC jacks
- Clips directly on to the internal battery clip
- Buy as many as you need, one for each pedal
- Just plugs on to your existing daisy chain cable
|  | 30cm Black Adaptor- Use it to extend your daisy chain, to get around large pedals or where pedals are far apart
- Standard extension cable with 2.1mm barrel plugs
- Straight plug on the end
- Buy as many as you need
- Just plugs on to your existing daisy chain cable
| 
| 18V Adaptor - Use it to power 18V DC pedals including some by MXR, Dunlop, Diamond and Fulltone (check compatibility)
- Uses a charge pump circuit to boost 9V DC to 18V DC
- Buy as many as you need, one for each pedal
- Just plugs on to your existing daisy chain cable
- Generates 18V DC, centre -ve on a 2.1mm barrel plug, up to 30mA
| For a more detailed list of what pedals the Powerstation will and won't work with see: Powerstation Compatibility Table Contact us here:
This email address is being protected from spam bots, you need Javascript enabled to view it
if your pedal is not on the list or you have any questions, and we'll get back to you within 24 hours. |
|
